News

A gas pressure regulating valve, which is characterized by: a single flow valve (4) is arranged above the oil circuit plate (1), an installation seat (9) is arranged under the oil circuit plate (1), a leather pad (10) is set between the lower part of the oil circuit board and the mounting seat; the upper control cavity of the oil circuit board (1) has a piston rod (3), and a piston rod sleeve (14) is arranged between the control cavity at the upper end of the oil circuit board and the outer piston rod, and the k-ring (2) is arranged in the inner hole of the piston rod, The internal thread of piston rod management center is equipped with hollow seat (5), the internal thread of piston rod management center and hollow seat are tightened by nuts (15); brake system spring yellow (7) is set between the upper piston rod and single flow valve (4), and the lower side of piston rod is provided with lightening spring yellow (8); check valve (11) is set in the inner cavity under the oil plate and check valve spring yellow (13) is set under the check valve, There are check valve covers (12) under the spring yellow (13); the check valve cover (12) is installed under the oil circuit board; three gas pipelines are set under the oil circuit board under the oil circuit board: the brake system pipe (16) connecting the upper end of the oil circuit board and the lower side of the piston rod, The air limiting plug (17) is set at the opening of the brake system pipe (16); the effective air cylinder pipe (21) connecting the middle inner cavity of the oil circuit board; the drainage riser (24) connecting the inner cavity of the oil circuit board; the relief limit plug (20) is set above the hollow seat; the working pressure chamber air limiting plug (18) is set at the middle position of the piston rod sleeve and the upper part of the oil road plate; the lower part on the right side of the oil circuit board is provided with the connecting oil road plate The air limiting plug (19) of the side inner cavity and the upper operating cavity of the oil circuit board is set; a dust filter (6) is set at the upper part of the single flow valve (4), a relief limit plug (20) is set above the hollow seat, a hollow seat guide post (22) is set in the middle of the oil circuit board and outside the hollow seat; the sealing O-ring is set in the guide column

China SNS Pneumatic was founded in 1999 which now has been the leading supplier of pneumatic components in China. The company covers an area of 30000 ㎡, having 5 production bases and more than 20 subsidiary companies with more than 1000 employees.SNS has passed ISO9001 and 2000 Quality Management System Certification because of its good service and high quality. By now there are more than 200 agents and distributors all over the world and we are looking forward to approach more international market.

Company: China SNS Pneumatic Co., Ltd.
Address: No.186 Weiliu Road, Economic Development Zone, YueQing, Zhejiang, CHINA
E-mail: zoe@s-ns.com
Phone: 057762768118

https://www.sns1999.com/