(2) the common medium-efficiency filters are: M-i, II, IV type foam filter, YB type glass fiber filter and so on. The key materials of the medium efficiency filter are glass fiber, high pressure polyethylene foam with small and medium size pores, and synthetic fiber made of polyester, polypropylene and nylon. (3) HIGH EFFICIENCY AIR SUPPLY OUTLET COMMON HIGH EFFICIENCY AIR SUPPLY OUTLET HAVE GB type and GWB type. The filter material is extremely fine glass fiber filter paper, porosity is very small. A very low filtration rate is selected, which improves the microporous filtration efficiency and free diffusion of fine particles, and therefore has a very high filtration efficiency. Air Compression out of pneumatic valves contains excessive water vapor and droplets, as well as solid residues such as rust, pebbles, and line sealants, which can damage Piston Rod seals, blocking small exhaust holes in electronic devices to reduce or invalidate the life of the electronic device. The function of the air filter is to extract liquid water and liquid droplets from the compressed air, and to filter out dust and solid residue in the air, but not to remove water and oil in the vapor state. 2007-9-2415:00[ hide ] the air filter controller compresses the air from the Auxiliary Air System Software and reduces the pressure to 4.1-4.4 bar, into the double h valve and the shift cylinder to complete the high and low gear shift of the gearbox. The key common fault of air filter controller is to relieve the pressure part failure, which leads to high air compression pressure in the double h valve and the shift cylinder, and destroys the double h valve and the shift cylinder There is because the air compressor oil channeling is more serious, resulting in the valve of the device block. 2007-9-2415:30 cost saving: Easy Posture, Time Saving and labor saving and human resources when the oil channel is disassembled and connected according to the quick connection. [1]2, fuel-saving: When the oil channel is broken, the product can be closed on the quick joint, the oil is not easy to discharge, to prevent hydraulic oil, steam pressure damage.
China SNS Pneumatic was founded in 1999 which now has been the leading supplier of pneumatic components in China. The company covers an area of 30000 ㎡, having 5 production bases and more than 20 subsidiary companies with more than 1000 employees.SNS has passed ISO9001 and 2000 Quality Management System Certification because of its good service and high quality. By now there are more than 200 agents and distributors all over the world and we are looking forward to approach more international market.
Company: China SNS Pneumatic Co., Ltd.
Address: No.186 Weiliu Road, Economic Development Zone, YueQing, Zhejiang, CHINA
E-mail: zoe@s-ns.com
Phone: 057762768118
https://www.sns1999.com/
Post time: Apr-09-2021