News

The main features of the MGPM compact guide cylinder are small size, light weight, strong lateral load resistance, and high non-rotation accuracy. The bearing of the guide rod can be installed with sliding bearing or ball bearing.

1. When the load changes during work, a cylinder with sufficient output power should be selected;
2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinders should be selected;
3. In places with high humidity, dust, or water droplets, oil dust, or welding slag, the cylinder should take necessary protective measures;
4. Before the cylinder is connected to the pipeline, the dirt in the pipeline must be removed to prevent the debris from entering the cylinder;

5. The medium used in the cylinder should be filtered by a filter element above 40μm before being used;
6. In a low temperature environment, anti-freezing measures should be taken to prevent the moisture in the system from freezing;
7. The cylinder should be run under no-load test before use. Adjust the buffer to small before running, and gradually loosen it, so as not to cause excessive impact and damage the cylinder;

8. The cylinder should avoid side load as much as possible during the working process in order to maintain the normal operation of the cylinder and prolong its service life;
9. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, and dust-proof blocking caps should be added to the intake and exhaust ports.